[admin@PE2] > export
/interface bridge
add name=Customer
add name=bridge1
/interface vpls
add disabled=no l2mtu=1500 mac-address=02:98:3E:17:C9:AA name=vpls1 remote-peer=2.2.2.2 vpls-id=1:1
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/mpls traffic-eng tunnel-path
add hops=192.168.45.4:strict,192.168.24.4:strict,192.168.24.2:strict name=TE-Static use-cspf=no
add name=dyn
/interface traffic-eng
add bandwidth=50Mbps disabled=no from-address=5.5.5.5 name=TE-CE1 primary-path=TE-Static secondary-paths=dyn to-address=2.2.2.2
/routing ospf instance
set [ find default=yes ] mpls-te-area=backbone mpls-te-router-id=bridge1 router-id=5.5.5.5
/interface bridge port
add bridge=Customer interface=vpls1
add bridge=Customer interface=ether2
/ip address
add address=5.5.5.5/24 interface=ether1 network=5.5.5.0
add address=192.168.35.5/24 interface=ether3 network=192.168.35.0
add address=192.168.45.5/24 interface=ether5 network=192.168.45.0
/ip dhcp-client
add disabled=no interface=ether1
/mpls ldp
set enabled=yes lsr-id=5.5.5.5 transport-address=5.5.5.5
/mpls ldp interface
add interface=ether3
add interface=ether5
/mpls traffic-eng interface
add bandwidth=100Mbps interface=ether3
add bandwidth=100Mbps interface=ether5
/routing ospf network
add area=backbone network=192.168.45.0/24
add area=backbone network=192.168.35.0/24
add area=backbone network=5.5.5.0/24
/system identity
set name=PE2
/tool romon
set enabled=yes id=00:00:00:00:00:05
[admin@PE2] >